Serie del producto

Contacte con nosotros

Correo electrónico de contacto: tina@smalllakesoutdoor.com

Dirección: Room805, 47-2C, CAMINO DE DAQING, WEIHAI, SHANDONG, CHINA

Pedal sup

A company specializing in inflatable products and outdoor sports

Palabra clave:

SMALL LAKES

Clasificación:

INFLATABLE WATER BIKE

Correo electrónico:

Tina@smalllakesoutdoor.com

Mensaje del producto

Otros productos

Product Details

Item Name.	Pedal sup	seat type Pedal sup(1 person)	seat type Pedal sup(2 person)	pedal tube sup
Item No.	SLS1A	SLS1B	SLS2A	SLS1C
Size	3209015cm 126''35''6''	3009015cm 118''35''6''	5009015cm 197''35''6''	34011915cm 134''47''6''
Material	Aluminum\PVC	Aluminum\PVC	Aluminum\PVC	Aluminum\PVC
Packing Size	903040cm 795040cm	965530cm 794532cm	1005545cm 794532cm	1005540cm 794532cm
Nr per C/T	1	1	1	1
WT per C/T	28kg/30kg	32kg/35kg	45kg/48kg	45kg/48kg
CBM per C/T	0.266	0.272	0.361	0.361
Load capacity	150kg	150kg	300kg	150kg

Proceso del producto

Cutting line

Gluing line

HB line

HF line

Printing line

Sewing line

Entorno de fábrica

Pequeño Lago Inc.

¿Necesita ser competitivo en el parque acuático y el negocio deportivo? De los tubos encantadores y seguros de los niños para relajarse, a los paseos inflables altamente durables y atractivos para la experiencia que late el corazón incluyendo los barcos, SUP, tubos de la diapositiva. Desde la producción en masa estandarizada ampliamente aceptada, hasta productos de nicho personalizados fabricados por más de 20 años de equipo de artesanos experimentados. Siempre damos la bienvenida a su juicio creativo. Si está buscando el mejor socio para obtener ganancias, somos la mejor opción para usted. No busque más allá de Small Lake Inc. Por favor, siéntase libre de tener la oportunidad de satisfacer sus necesidades, estamos esperando su visita.

Mensaje del producto

CONSIDERACIONES

Inflation & Care

Inflate the product at room temperature between 15°C and 25°C. The material will be more flexible, and inflating will be easier. Do not inflate when the product is cold. Inflate all products using a volume air pump such as foot pump, manual, electric or other air pump designed to blow low pressure (no more than 30 mbar/0.44 PSI/3 KPa). Do not use high pressure compressor or service station tire air pump. Do not over inflate. Inflating quickly with high pressure and overinflating will damage the welding seams. These resulting damages are not covered by the warranty. All these products have been designed for use in a well maintained and properly supervised amusement facility.They are intended for use in easy flowing water and proper safety procedures should be followed. Monitor the condition of all tubes, and remove worn or damaged products from service immediatly.

Storage recommendations

Make sure the inflatable tube is clean and TOTALLY dry before preparing for the storage. Deflate the tube by inserting a small plastic straw into the valve (not a rigid straw to avoid damages on the valve and material). Make sure the tube is totally empty of air. Remove the plastic straw from the valve, before piling the tubes on each other. Store the tubes flat (not folded), on a flat and clean surface, in a dry storage area, away from sun light. Avoid excessive weight on the tubes, which may result in wrinkles and even other squeezes and pinch problems. Do not store close to a heater or any source of excessive heat. Ideal ambient storage temperature : between +5°C and +20°C.. Make sure that no rodents (rats, mice….) can approach the tubes.

Warranty guidelines

All products supplied to the waterpark industry are guaranteed to be free of manufacturer’s defects at the time of delivery. These products are designed to be used in professional waterpark/amusement facilities and under proper supervision. Not intended for private use. Legitimate manufacturer’s defects are: improperly sealed seams, improperly manufactured valves, and handles falling off due to improper sealing. Other defects such as pinholes, handles and/or valves ripped off, cuts and abrasions, and all normal wear and tear, are not manufacturer’s defects.